Defining Wind Generated Electrical Power and Discussing Pros and Cons of the Technology

Introduction

Wind generated electrical power exists through harnessing wind-power energy with turbines. To fully understand wind generated electrical power, one must understand how wind powered electricity is made; resources needed to utilize wind power; types and sizes of wind turbines; building a wind turbine; potential positive and negative impacts of the technology; where wind powered electricity can be effectively generated; and, offsetting the costs of wind powered electrical technology.

How Wind Powered Electricity is Made

The technology of wind generated electrical power functions by creating electricity through the use of various styles of wind turbines. Initially, one might ask, “So how do wind turbines make electricity?” Simply said, a wind turbine works the opposite of a fan. Instead of using electricity to make wind, like a fan, wind turbines use wind to make electricity. The wind turns the blades, which spin a shaft, which connects to a generator and makes electricity.

Resources Needed to Utilize Wind Power

The primary resource of Wind powered technology is, of course, wind. Wind is very abundant in many parts of the United States and other parts of the world. Wind resources are branded by wind-power density classes, ranging from class 1 (the lowest) to class 7 (the highest). Good wind resources (e.g., class 3 and above, which have an average annual wind speed of at least 13 miles per hour) are found in many areas. Wind speed is a critical of wind resources, because the energy in wind is proportionate to the cube of the wind speed. In other words, a stronger wind means more power.

Wind resource development requires land and may compete with other uses of that land, and those alternative uses may be more highly valued than electricity generation. However, wind turbines can be positioned on land that is also used for grazing or even farming. Wherever a wind farm is to be built, roads are cut to make way for shipping parts. At each wind turbine location, the land is graded and the pad area is leveled. Wind energy also requires the building of wind turbines.

Types and Sizes of Wind Turbines

Modern wind turbines fall into two basic groups: the horizontal-axis variety and the vertical-axis design, like the eggbeater-style Darrieus model, named after its French inventor. Horizontal-axis wind turbines typically either have two or three blades. These three-bladed wind turbines are operated “upwind,” with the blades facing into the wind. Darrieus models, or vertical-axis wind turbines, have two vertically oriented blades revolving around a vertical shaft.

In addition to different types, there are many different sizes of wind turbines. Utility-scale turbines range in size from 100 kilowatts to as large as several megawatts. Larger turbines are grouped together into wind farms, which provide bulk power to an electrical grid. Single small turbines, below 100 kilowatts, are used for homes, telecommunications, or water pumping.

Small turbines are sometimes used in connection with diesel generators, batteries, and photovoltaic systems. These systems are called hybrid wind systems and are typically used in remote, off-grid locations, where a connection to the utility grid is not available.

Building a Wind Turbine

The first step in building a wind turbine is setting up the tower where the fiberglass nacelle is installed. The nacelle is a strong, hollow casing that contains the inner workings of the wind turbine. Usually made of fiberglass, the nacelle contains the main drive shaft and the gearbox. Its inner workings also contain blade pitch and yaw controls. The nacelle is assembled and attached onto a base frame at a factory.

The most diverse use of materials and the most experimentation with new materials occur with the blades. Although the most dominant material used for the blades in commercial wind turbines is fiberglass with a hollow core, other materials in use include lightweight woods and aluminum. Wooden blades are solid, but most blades consist of a skin surrounding a core that is either hollow or filled with a lightweight substance such as plastic foam or honeycomb, or balsa wood. Wind turbines also include a utility box, which converts the wind energy into electricity and which is located at the base of the tower. The generator and electronic controls are standard equipment whose main components are steel and copper. Various cables connect the utility box to the nacelle, while others connect the whole turbine to nearby turbines and to a transformer.

Potential Positive and Negative Effects of Wind Powered Electricity

There are a variety of potential positive and negative impacts of wind powered technology.

Potential positive impacts include:

• Wind energy is friendly to the surrounding environment, as no fossil fuels are burnt to generate electricity from wind energy.

• Wind turbines take up less space than the average power station. Windmills only have to occupy a few square meters for the base; this allows the land around the turbine to be used for many purposes, for example agriculture.

• Newer technologies are making the extraction of wind energy much more efficient. The wind is free, and we are able to cash in on this free source of energy.

• Wind turbines are a great resource to generate energy in remote locations, such as mountain communities and remote countryside.

• Wind turbines can be a range of different sizes in order to support varying population levels.

• When combined with solar electricity, this energy source is great for developed and developing countries to provide a steady, reliable supply of electricity.

Potential negative impacts include:

• Wind turbines generally produce less electricity than the average fossil fuelled power station, requiring multiple wind turbines to be built.

• Wind turbine construction can be very expensive and costly.

• Wind turbines can have a negative impact to surrounding wildlife during the build process.

• The noise pollution from commercial wind turbines is sometimes similar to a small jet engine.

• Protests and/or petitions usually confront any proposed wind farm development. People feel the countryside should be left intact for everyone to enjoy its beauty.

Where Wind Powered Electricity Can be Effectively Generated

Places in the world where wind blows strong and often, people and businesses can harness the wind as an option to use in the generation of electricity. Globally, these places include much of North America, southern South America, Greenland, most of Europe, Northern Africa, eastern Asia, most of Australia, and anywhere there are mountains or large hills. The top 5 countries producing electrical wind power in 2007 were: Germany, United States, Spain, India and China, respectively.

Considerable wind speeds also occur across oceans and large water bodies. Since most of the world’s population lives near oceans, wind farms with strong offshore and onshore breezes could produce an abundant amount of electricity. On land in the USA, the major wind corridor is the Great Plains which includes the states of North Dakota, South Dakota, Nebraska, Kansas, Oklahoma and Texas. The wind corridor also extends into the states west to the great mountains west, including eastern Montana, Wyoming, Colorado, and New Mexico. There are also considerable wind resources in eastern and southern Minnesota and the entire state of Iowa, diminishing south through Missouri and east through southern Wisconsin and northern Illinois, Indiana and Ohio. Parts of New York and the New England states also have considerable wind.

The Department of Energy (DOE) estimates that wind power could supply the US with 100% of its electricity, just from the Great Plains wind corridor or from offshore wind farms alone. According to the “Pickens Plan,” a $10 billion wind farm with 2500 generators can supply enough energy for 1.3 million homes, and for $1 trillion the Great Plains wind corridor could supply 20% of America’s electricity. That would be about 250,000 generators to supply 130 million homes.

In a report published by the U.S. Department of Energy, “20% Wind Energy by 2030: Increasing Wind Energy’s Contribution to U.S. Electricity Supply,” that report concluded that:

• Reaching 20% wind energy will require enhanced   transmission  infrastructure, streamlined siting and permitting regimes, improved reliability and operability of wind systems, and increased U.S. wind manufacturing capacity.

• Achieving 20% wind energy will require the number of turbine installations to increase from approximately 2000 per year in 2006 to almost 7000 per year in 2017.

• Integrating 20% wind energy into the grid can be done reliably for less than 0.5 cents per kWh.

• Achieving 20% wind energy is not limited by the availability of raw materials.

• Addressing  transmission  challenges such as siting and cost allocation of new  transmission  lines to access the nation’s best wind resources will be required to achieve 20% wind energy.

Offsetting the Costs of Wind Powered Electrical Technology

Although wind generated electrical power seems to be an unlimited resource, and, the best wind sites appear to be competitive with market electricity prices in most U.S. regions, several factors exist that make it a less appealing source of alternative energy in terms of economic cost. First off, wind is not uniformly priced resource. Its costs vary widely depending on project scale, wind speed, region, and other factors. Second, the benchmark for comparison with wind to other fuels varies regionally. Third, extra revenue is required to make a project viable, sunk costs are considerable.

To offset the factors that make wind powered electricity a less appealing source of alternative energy and promote its continued growth, wind energy in many areas receives some financial or other support to encourage development. Wind energy benefits from subsidies either to increase its attractiveness or to compensate for subsidies received by other forms of production, such as coal and nuclear, which have significant negative impacts. In the United States, wind power receives a tax credit for each Kilowatt hour produced; that was 1.9 cents per Kilowatt hour in 2006. The tax the credit has a yearly inflationary adjustment. Many American states also provide incentives, such as exemption from property tax, mandated purchases, and additional markets for “green credits.” The Energy Improvement and Extension Act of 2008 contain extensions of credits for wind, including micro-turbines.

Secondary market forces also provide incentives for businesses to use wind-generated power, even if there is a premium price for the electricity, socially responsible manufacturers pay utility companies a premium that goes to subsidize and build new wind power groundwork. Companies use wind-generated power, and in return they can claim that they are making a “green” effort.

Undoubtedly, further tax credits, subsidies and incentives will also be needed to achieve the goal of 20% Wind Energy by 2030. Today, wind power approximately accounts for about 2% of the electricity generated in the United States.

Summary

The technology of wind generated electrical power functions by creating electricity through the use of various styles of wind turbines is a very viable alternative energy. Although wind generated electrical power does have some negative impacts, this author feels that in terms of long-term cost and benefit compared with other types of energy, such as the burning of fossil fuels, using a renewable resource such as wind generated electrical power economically, environmentally, and socially is making more and more sense.

Cold Sores and Staff Infection

Cold sores are a result of infection with the herpes simplex 1 virus. This is a viral infection that once you have contracted stays in your system for life. The only treatments available are antiviral management, because there is no cure.

A person who suffers from atopic dermatitis should be extremely cautious around anyone with a cold sore. Atopic dermatitis, better known as eczema, is rashes and irritations on the skin caused by any number of environmental allergies. This condition causes very itchy dry patches of skin that can break open and are prone to secondary infection from scratching. Studies have shown that patients with eczema are more likely to carry stash on their skin than those who do not.

The herpes simplex virus can spread rapidly in a person with atomic dermatitis. This can cause an infection known as eczema herpetic. It can spread over the whole body or remain localized in areas of active eczema outbreak. This situation should be monitored very carefully by a medical professional.

Herpes virus is very contagious and the spreading capability increases in the person who has eczema. The virus can spread over the whole body very quickly leaving you open to secondary infections and especially staph. As noted above the eczema carrier is also more apt to have the staph already present on their skin, thus when scratching sores or rashes, the staph can penetrate and make a bad situation even worse.

If you have eczema and been exposed to the herpes simplex virus, it is important that you see your doctor immediately. They may want to start you on an antiviral medication sooner rather than later to ward off a potential outbreak.

Signs that you may be getting a herpiticum outbreak will include blisters, sores within the areas of eczema. These tiny blisters will soon pop and spread the virus at an alarming rate. There is a chance of fatality if not treated properly. You may feel tired or feverish and notice some swelling in the area of the rash.

It is important to note even if you are not overly concerned for yourself, you should be concerned for your family and coworkers. The virus is very contagious and should be treated immediately. Besides early treatment can lessen the severity and duration of your outbreak.

In very severe cases, your doctor may prescribe a bleach bath to kill the bacteria. However, this should never be undertaken without a doctor’s advice as the wrong dilution can cause severe problems. Phototherapy and laser therapy are also alternative therapies that your doctor or dermatologist may consider.

The main thing to remember is prevention is better than cure, use good hand washing practices and keep yourself healthy. When you are run down your immune system becomes compromised and less able to fight off infection and the herpes particles.

Defuse It – How to Not Let Anger Ruin Your Relationships

If you’re tired of feeling alone and not understood after an argument or conversation, then here’s what you need to do to keep your communications with the people want to open.

Empathize

Empathize with the people around you. You might consider that when these people do things that get to you that maybe they did not intend to do it. Now if you know that the attack was intended then you need to ignore it all. Because if a person can make you angry whenever they want to, they can control you.

But if it is not intentional, consider that the other person does what they do because of a weakness that they have. They might need your help to get some things sorted out.

Situations and circumstances that involve anger are sometimes not easy to deal with.

Soft answers

I bet you did not know that you can get someone to stop being angry by speaking soft and kind words to them. It is important that you recognize this for your relationships because when you show anger to someone, you could expect that in the majority of cases they will return that anger back to you in the form of anger of their own.

So the anger will have to stop somewhere and stopping anger will involve the use of soft answers going back and forth between the people involved.

Your hope and effort is that this way of dealing with anger will be picked up by all involved and that the angry situation would become less of an issue because of the goodwill and cooperation that soft answers are able to produce.

Do you want your relationship?

Another thing you will want to do is really consider if the relationship you are dealing with is important to you and what you are trying to do in life.

If you check it out and find that the relationship is right and you want it, then you will find this reason alone one of the biggest motivators for the persistence that is necessary for success.

If you check and find that the relationship is not worth your time then you will not have the strength to overcome the difficulties that are there. You still do not want anger to destroy it, but then maybe this bad relationship may have something to do with your anger in the first place.

Anger management classes

You do not need to wait until something drastically bad happens before you do an anger management class, so do one. Do an online class. 95% of people with anger problems benefit from taking an anger management class in as little as two months. And anger management classes do not cost much; not even half as much as losing the respect of the people you care about, and the classes can be done very conveniently in the comfort of your home or office when they are done online.

But the bottom line is that if in your heart you feel as if your relationship is threatened because of anger an anger management class can help you get your anger under control and give you a real shot at saving your relationships.

You should seriously consider carrying out these anger management techniques, you will begin to see your anger start to come under control. Angry people sometimes don’t get what they need from their anger management techniques. As for you, start applying these tips, and get yourself controlled today.

Some Interesting Common Cold Statistics For The New Season

Common cold statistics provided by government agencies indicate that on the average children have six to ten colds per year, but some children have as many as twelve. Seeking treatment for a common cold is one of the leading causes of doctor visits, though doctors can do little to treat the illness. Antibiotics are ineffective and should not be taken for common cold prevention or treatment. Over use of antibiotics is believed to be the cause of an increase in more resistant strains of bacteria.

What to take for a common cold is a matter of some debate. Practically everyone has there own home remedy and researchers have studied many of these for effectiveness and safety. Over the counter drugs such as antihistamines have been evaluated for their effectiveness in treating common cold symptoms and while research indicates that these products are safe when used as directed, many of them may be ineffective. One study showed that the most effective of these over the counter drugs is one called guaifenesin, an expectorant.

Common cold statistics relating to lost days of school indicate that 22 million school days are lost each year on account of the illness. However, many products should not be taken by children. The directions for a common cold remedy will typically say “not for children under 12” and may advise doctor consultation. Additionally, parents should not give child aspirin or products that contain aspirin because of the established link between aspirin use, viral infections and Reye’s syndrome, a rare, but sometimes life threatening disease than can follow viral infections in children. A number of infant and toddler deaths have been associated with overdoses of over the counter cold remedies. When treating your children, read directions carefully, age and weight are factors. Those products that are designed for “children” are usually not safe for infants. Always check with your doctor before given any over the counter medication to a child.

Adult common cold statistics vary greatly. On the average, most adults have two or three colds per year, but some people have none and some have more than three. Those who care for school age children probably have more than the average. People who have asthma are more susceptible to colds. Scientists studying asthma patients found that they produce less than average anti-viral proteins. Anti-viral proteins, produced by specialized blood cells, can prevent a virus from being able to reproduce and can destroy viruses by attaching to them and causing holes in their cellular walls. Products that stimulate immune system function are sometimes recommended for a common cold, for this and other reasons.

Most immune system stimulants contain vitamin C. During an infection, vitamin C levels in the bloodstream decrease dramatically. Vitamins A, E and the mineral zinc are also necessary for proper immune system function. Other nutrients, such as calcium and magnesium are needed so that the cells of the body can easily absorb vitamin C. In other words, a good daily multi-vitamin, in addition to a well balanced diet, rich in fruits, vegetables and whole grains can be good for a common cold and for overall good health.

The latest common cold statistics from Reuters Health Information concerns a study performed at the University of Virginia, in which researchers enlisted 15 people who were infected with the rhinovirus (the virus that causes the majority of common colds) to stay in a hotel room overnight alone. The objects in the room that the participants reported touching were swabbed and tested for active rhinovirus on the next day. The researches concluded that the virus remained active and capable of infected others for a day or longer. Previous information for a common cold causing rhinovirus indicated that the virus could remain active on surfaces for as long as three hours. What this new study means is that the virus remains active longer and is more easily transmitted than previously thought, making good health habits to prevent   transmission  even more important. To learn more about the common cold and natural products that may help reduce the number you get every year, please visit the Immune System Booster Guide.

Spyware, Viruses, Malware, Worms, Trojan Horses, and Adware: Symptoms, Solutions, and Prevention

Virus:

A Virus or Computer Virus is a self-replicating program or piece of script or code that make copies of itself and then either attaches itself to an existing file on the infected system or store copies of itself on the system with innocuous sounding names like ‘repair tool’.

The virus is limited to spread itself only by either being transmitted or sent by an unwitting user or carried on a portable storage medium from one system to another. However, if a virus gets embedded somewhere on a network drive then anyone who opens or clicks on the infected document or file can end up getting infected as well.

Spyware:

Spyware is software that gathers information about a users Internet habits, browsing patterns, email passwords, usernames and even credit card information, in essence, ‘spying’ on the hapless user. This type of software usually gets installed without the knowledge of the user and can transmit the collected data to a third party over the Internet secretly as well.

Malware:

Malware can refer to any number of malicious forms of software or code that has been intentionally designed to perform one or more of the following malicious acts:

> Infiltrate a users computer system without their consent.

> Gather sensitive personal information such as credit card numbers, social security numbers, birth dates, or system passwords.

> Create back doors or remote entry points to allow hackers access to the system.

> The destruction of critical data and/or corruption of system files.

Malware is a general term and is commonly used to include, Viruses, Worms, Spyware, Trojan Horses, and some forms of Adware. The actual intention of malware can vary but by definition it is any software that is destructive by nature. Because the term Malware is so broad it is hard to cite one specific source for the most infections.

Worm:

A Worm or Computer Worm is a self-replicating piece of computer code that uses a computer network to spread copies of itself to the other nodes on the network. Unlike the Virus a Worm can accomplish this without any intervention or help from the user. Also unlike a Computer Virus the Worm does not have to attach itself to an existing computer program or file.

Many times a Worm will also be used to carry a ‘payload’. The ‘payload’ is code that is designed to perform some specific function. In some cases the payload allows the Worm to send documents through the email accounts of the infected system attaching itself and its payload to the email as an attachment. When the unsuspecting recipient of the email opens the attachment the process starts again.

Trojan Horse:

A Trojan or Trojan Horse Virus is a program that usually gets downloaded installed and executed on a computer system which then appears to be performing some useful function but is unknowingly allowing unauthorized access to the user’s computer system at the same time.

Hackers use Trojans to gain access to a user’s computer remotely and then perform any number of malicious activities. These nefarious activities can include but certainly are not limited to:

> Data Theft.

> Keystroke Logging.

> Downloading or Uploading Files.

> Viewing the Victims Screen.

> Crashing the Users System.

Adware:

Adware is advertiser supported software that displays, plays or downloads advertisements either onto the computer desktop or into the computers web browser as a condition of the software installation. Most Adware is free to use as long as you don’t mind annoying pop-up windows appearing at random intervals advertising some product or another. I have seen some Adware that opened a new window about every 1 to 2 minutes, making it nearly impossible to use the system at all until the software had to be removed.

Additionally, Adware will almost always be collecting data about your Internet habits and browsing behavior to tailor ads specifically to best match the data recovered. In that respect it is actually very similar to many types of Spyware. In most cases Adware is simply a way to place advertisements in the face of the user although it’s a fine line before you could also classify it as Spyware.

With Adware however, in some cases you may actually be given a chance to review and choose whether or not to accept the terms and conditions associated with the software before installing it.

IT WOULD BE ADVISABLE TO READ THESE TERMS VERY CAREFULLY BEFORE CHOOSING TO ACCEPT.

Symptoms of Infection:

> Very sluggish computer performance.

> Random system lockups or crashes.

> Browser redirection – you are taken to websites you were not searching for while browsing the Internet.

> Excessive number of popup windows appearing at random while surfing the Internet.

> You are informed that your system has ‘hundreds’ of active infections and you are redirected to a website that insists you pay for and download their specific software package to remove the infections.

Solution:

There are many good anti-virus / anti-spyware products on the market designed to detect and remove these types of infections. McAfee and Kapersky are good but AVG and Avast! have similar products and offer a free downloadable version. Be sure to complete a ‘Full’ system scan and quarantine and remove all active infections. Configure your anti-virus software to perform ‘active’ scanning or real-time system monitoring.

Prevention:

> Do not install software you have downloaded from the Internet unless it has come from a known, reliable source.

> Use caution if using file sharing platforms such as LimeWire or torrent sites to download files.

> Do not open any email attachments from unknown sources.

> Use a good anti-virus/anti-spyware application and scan your system at least weekly. Be sure your anti-virus software is totally up to date with the latest virus definitions.

> For Windows users: Be sure to visit the Microsoft update site and download all the latest Microsoft security patches.

Danger of Blood Borne Pathogens Contaminations!

Blood borne pathogens are microorganisms such as viruses or bacterias that are carried in blood or body fluid and can cause disease in people, including, Hepatitis B (HBV), AIDS and the Human Immunodeficiency Virus (HIV), Blood borne pathogens can be transmitted through contact with infected human blood and other potentially infectious body fluids.

Occupation Exposure can occur through :

1. Accidental puncture from contaminated needles, broken glass, or other sharps.

2. Contact between broken or damaged skin and infected skin and infected body fluids.

3. Contact between mucous membranes and infected body fluid.

In an emergency situation involving blood or potentially infectious materials, always use Universal Precautions and try to to minimize your exposure by wearing gloves, splash goggles, pocket mouth to mouth resuscitation masks, and other barrier devices.

If you are exposed:

1. Wash the exposed area thoroughly with soap and running water. Use non-abrasive, anti-bacterial soap if possible. If the blood is splashed in the eye or mucous membrane, flush the affected area with running water for at least 15 minutes.

2. Take a blood test and Hepatitis B vaccination.

3. Tell your doctor the source individual. Try to get the individual blood tested as soon as possible for HIV or HBV after consent is obtained.

Anytime there is blood-to-blood contact with infected blood or body fluids, there is slight potential for transmission.

Unbroken skin forms an impervious barrier against blood borne pathogens. However, infected blood can enter your system through:

Open sores, cuts, abrasions, acne, and any sort of damaged skin such as sun burns or blisters, damaged or open wounds.

Always take precaution and treat all human body fluids and items soiled with human body fluids as contaminated. With contaminated, always first thing to do is to disinfect all spills of body fluid and pre-soak all contaminated clothing.

Motorcycle Automatic Transmission – The Top 3

Motorcycle enthusiasts love a wild goose chase such as the famously beloved, Bigfoot. Many motorcyclists fail to believe that there is actual automatic transmission motorcycles that exist. This is not true because the knowledge isn’t out there. This is actually true because of there just aren’t to many readily available. The top three automatic transmission motorcycles really exist and the proof is found by reading on.

3. The Honda DN-01

The Honda DN-01 was introduced in 2005 as a cruiser motorcycle. This is one of the first of very few automatic transmission motorcycles ever released. The bike didn’t actually make it on showroom floors until 2008-2009. This bike is so powerful to the consumer that it is still being offered in shops as of early 2011. Missing you chance to check out the Honda DN-01 is just wrong. The Honda DN-01 is just one of those bikes you can’t miss a chance to try out for yourself.

2. The Aprilia Mana 850

The Aprilia Mana is a newer automatic transmission motorcycle that was just released last year. This bike is fast and very powerful. The Aprilia Mana 850 is a sleek sports bike that offers highlights from leather to chrome and everything in between. There is nothing better than a quick bike with the backing of being an automatic transmission motorcycle. The Aprilia Mana 800 makes its way to this top three list for being a solid bike with an even nicer ride.

1. The Honda CB750

The Honda CB750 has had many models in its series between 1969-2003. The Honda CB750 automatic transmission models is better known as the Honda CB750 Hondamatic. This model is one of a kind that has a coil ignition start and a solid inline four stroke SOHC air cooled engine. The only downfall to this model was the fact that the gear changing was not automatic. Instead, each gear was chosen by a foot-controlled hydraulic valve. This bike only sold in the North American market but can now be found all over the world.

How to Cure Ringworm?

Ringworm is a very contagious skin fungal infection. It can affect all individuals and even animals. During the infection stage of the ringworm, they produce fungal spores that can be transmitted to others. When you become exposed to fungal spores, you are at high risk to develop ringworm. But ringworms are treatable, and ringworm cures are very helpful to remove and kill fungal spores.

It is very essential to kill the fungi, and prevent the spread of ringworms to your body and to other people or animals. Here are some tips that will help you:

– Perform environmental disinfection regularly. It is important to maintain a clean environment because fungal spores can be present anywhere, especially to places where the infected person has been exposed to. Bleach is common in every household, and is very effective in disinfecting the environment. You just need to make a 1:10 bleach and water solution, and use it in decontamination of floors and surfaces. This will effectively kill the fungal spores, and prevent its transmission.

– Use a vacuum with HEPA filters. High Efficiency Particulate Absorbing or Arrestance (HEPA) filter removes at least 99.97% of airborne particles such as dust and fungi. It is very useful in cleaning carpets and upholstered furniture to remove fungal spores.

– Isolate infected pets. It is very important to separate your infected pet from other animals. You should not touch or come in contact with the infected pet because you can contract the fungal spores that cause ringworm. Consult your pet’s veterinarian so that you can determine what type of treatment will help your pet resolve its ringworm.

– Do not share personal articles. Sharing is a good act but if you have ringworms, it is a big no to share your personal items to others. Your things are contaminated with fungal spores. You should keep them and disinfect them using bleach.

– Keep a clean body. Fungi flourish in dirty areas. Proper personal hygiene should be observed to prevent the spread of ringworm on your skin. It is also important to perform regular hand washing after treating your ringworm, and after touching or treating your infected pet because you can obtain fungi spores from it.

– Maintain a sweat-free body and wear comfortable clothing. Fungi thrive in hot and moist areas of your body such as armpits, groins, and areas which have folds especially to obese individuals. You should keep yourself dry and avoid wearing tight clothes.

– Use a natural ringworm remedy. Natural ringworm remedies are found to be effective against ringworm, and they are absolutely safe to use. They are medicinal herbs that use leaves or extracted oil to cure ringworm such as turmeric (Curcuma longa), coconut oil (Cocos nucifera), mustard seeds (Brassica nigra),cassia leaves (Cassia fistula), holy basil leaves (Ocimum sanctum), butea seeds (Butea monosperma), and papaya seeds (Carica papaya). They are applied directly over the ringworm patch. Carrot (Daucus carota) and spinach juice (Spinacea oleracea) are also helpful in treating ringworm because they contain large amount of beta-carotene, which are very good for skin care.

– Apply topical creams. Topical creams are effective for ringworms that have mild symptoms. They are over-the-counter medications that help to relieve ringworm symptoms and kill fungi that cause ringworms. Topical treatment should be used for 2 to 4 weeks to effectively eradicate the fungi. Topical medications include Miconazole (Micatin, Desenex, Daktarin, Monistat-Derm, and Decocort), Clotrimazole (Mycelex and Lotrimin), and Terbinafine (Lamisil AT, Lamisil, and Lamisil Dermgel).

– Administer anti-fungal pills. Anti-fungal pills are systemic treatment for severe cases of ringworm. It is recommended to consult your physician so that you will be advised on the proper dosage and length of treatment using oral anti-fungal medications. Anti-fungal pills include Griseofulvin (Gris-PEG, Grifulvin V, Fulvicin P/G, and Griseofulicin), Itraconazole (Sporanox and Sporanox PulsePak), Terbinafine (Lamisil), and Fluconazole (Diflucan).

The Parent’s Responsibility in Sex Education

Parents ought to be the first source of sex education for their children. Don’t think that because children can learn about human sexuality in school, your responsibility to teach them about sex has been removed. Especially now that there is confusion as to how to teach human sexuality in school, the parents must be ready to assume the role to educate their children in everything they need to know to understand their sexuality.

Who’s better to teach about morality and the ramification of sex and sexuality to your children than you their parents? Often times, the school only teaches about the anatomy of human sexuality and the issue of morality and the taboos related to sex are often placed on the sidelines. This is where you should come in – teach your children their moral obligation when it comes to sex.

Sex education does not involve only teaching the children about the anatomy of the human reproductive organ. It’s much more than that. Sex education also involves teaching the children their moral obligation towards the opposite sex. Even more so for teenagers, you need to teach them their moral obligation towards their boyfriends or their girlfriends for that matter.

More so if your teenagers are already sexually active. You have an obligation to open their eyes about the possible ramification of their action. Your son could get a girl pregnant or your daughter can become pregnant if they are practicing sex at a very young age. They should understand the implications of their actions.

Another very important aspect of sex education you should teach your children is the issue on sexually transmitted diseases. If they are already sexually active, they must understand that they can contract disease by sleeping around with many partners, or even from their very first sexual encounter

Sex education is always a difficult topic to discuss with your children at home. But this is yet another role of parents that they cannot escape from.

Herpes and Pregnancy

Herpes, both oral and genital, are highly communicable diseases caused by the two strains of the Herpes Simplex Virus: HSV-1 and HSV-2. Genital herpes is transmitted sexually and is rarely transmitted from a pregnant mother to her unborn child, but could prove fatal for the unborn infant if it is transmitted.

It is possible, though unlikely that someone can transmit the virus through the placenta during pregnancy. If this happens, chances of the baby being born with a defect or a miscarriage increase.

The   transmission  also depends upon the stage of pregnancy in which the primary episode of herpes sets in. If the women had primary genital herpes during the first trimester, then there are less chances of the baby being infected. This is because it usually takes the body three to four weeks to buildup antibodies against the virus.

So if herpes happens at the onset of pregnancy, the body gets enough time to build up the immune system. As a result, these antibodies are also passed onto the baby. Generally, mothers can have a normal vaginal delivery.

But this is not so if the woman gets the infection in the second or third trimester of pregnancy. If the blood tests confirm that the women has never had herpes before the experts will recommend a caesarian delivery. This is because at these stages, the body does not get enough time to build up the immune system and the chances of  transmission  are extremely high.

It is easier to prevent herpes than it is to cure it. The highest risk to an infant comes from an infected mother who contracts HSV-1 or 2 during pregnancy and the best way to avoid this is by preventing this situation. Since Genital Herpes is a sexually transmitted disease, steps should be taken to ensure that you don’t transmit herpes during this crucial time.